Views: 806 Author: Site Editor Publish Time: 2018-06-05 Origin: Site
How does the laser cutting machine deal with burrs? Laser cutting machine processing sheet metal burrs are the reasons for the following, let's give you a simple analysis.
Laser cutting machine technology is how to deal with the problem of burr, some customers in the use of laser cutting machine processing sheet metal, cutting out the workpiece effect is very not ideal, and the burr is very much, and many customers begin to doubt the quality of laser cutting machine products, it is not. During the cutting process of metal laser cutting machine, because of improper operation and technical problems, the material will not produce burrs.
Burrs will only occur in metal cutting, and there is no burr problem in non-metal cutting. How does the burr come into being? In fact, burrs are excessive residue particles on the surface of metal materials. If a material has burr, then the material can be identified qualitatively. The more burrs, the lower the quality. Laser cutting machine processing sheet metal burrs are the reasons for the following, let's give you a simple analysis.
The working principle and technical analysis of laser cutting machine have obtained the cause and solution of burr.
1. Here is a deviation between the upper and lower positions of the focus of the beam.
Solution: adjust the location of the focus and adjust it according to the offset position.
2. The output power of the machine is not enough.
Solution: check whether the work of laser cutting machine is normal. It is not normal to repair and maintain in time. If normal, check if the output value is correct.
3. The cutting speed of the cutting machine is too slow.
Solution: timely adjust and improve the speed of wire cutting.
4. The auxiliary gas of the cutting machine is not pure enough.
Solution: explain the enhancement of the purity of the auxiliary gas.
5.The addition point of the laser beam of the 5. cutting machine has shifted.
Solution: focus on debugging, timely adjustment.
6. Laser cutting machine operation time is too long and produce instability.
Solution: turn off the machine restart and let the machine rest.
Metal laser cutting machine is a precise machine, operation is also a fine work, often a data error will cause its work operation is not normal, so in the work should be meticulous, reduce and avoid mistakes.
The main reason for the burr in the laser cutting machine is to produce the burr. When the laser cutting machine is working the workpiece, the high energy produced by the laser beam irradiates the workpiece surface makes the workpiece surface vaporize quickly and vaporizes, so as to realize the purpose of cutting. But here is a core device that we must attach importance to, that is, auxiliary gas. The auxiliary gas is to blow off the slag on the surface of the workpiece when the workpiece is vaporized on the surface of the workpiece. If the auxiliary gas is not used, the burr will be attached to the cutting surface after the slag is cooled. This is the main reason for the formation of burrs.
Another reason is the quality of the equipment itself, and the parameter setting factors. All the customers must be able to adjust the equipment by professional operators when they buy the laser cutting machine.
Laser cutting machine to solve the burrs of sheet metal:
1. Air compressor must be equipped with auxiliary gas for cutting.
2. Find professional operator to debug the parameters of laser cutting machine until normal.