Do you know bending, grooving and rolling

Grooving Machine

Fix the slotted sheet on the workpiece table, adjust the starting point of the processing, and the tool post-adjustment motor drives the tool post to plan the plate to form the required "V" groove. Depth and width can be guaranteed by the amount of infeed and different tools. Before grooving, you need to program according to the number, spacing, depth, and width of the grooving plate. After entering the programming parameters, you can automatically groove.

Plate bending machine

According to the material and thickness of the plate, the bending machine can bend the plate with different angles by changing the mold and adjusting the bending strength.

The CNC bending machine has an upper die and a bottom die, and the upper die has a standard knife die, a sharp knife dies, a machete die and a special-shaped die. The bottom die has a corresponding die. When bending the plate, you need to enter the thickness of the plate to be bent, Parameters such as length, forming an angle, and pressure is divided into front and back knives. Bending toward the back of the finished plate is called front knives, and bending toward the front of the finished board is called back knives. Generally, the board can be folded. The minimum bend length is 5 times the thickness of the sheet. 

Board vol bending plate

The upper roll of the rolling machine is in a symmetrical position in the center of the two lower rolls. The vertical rolling movement of the piston is effected by the hydraulic rolling oil in the hydraulic cylinder. The final gear of the main reducer drives the gears of the two lower rolls to engage in a rotary motion that provides torque. The flat plastic metal plate of the plate rolling machine passes between the three work rolls of the plate rolling machine, with the help of the upper roller's pressing down and the lower roller's rotating movement, the metal plate is continuously bent through multiple passes to produce permanent plastic deformation. It can be rolled into various arc shapes required.